Random Beep & Blink Delays

Code

The code in the editor below is ready to run! Plug Buzz in to your computer's USB port with the cable and hit 'Upload Your Code!' to see what it does. Change something in the code, like a delay or pin number. Try to add something new to the program - it's yours to tinker with! You can always press the 'Restore' button to return the code to the working example.


/* Use random() to select the tone you play, the LED you light, and how long your delays last for a truly random sound and light party */ void setup(){ //RGB LED pins pinMode(3,OUTPUT); pinMode(4,OUTPUT); pinMode(5,OUTPUT); pinMode(2,OUTPUT); //Speaker } void loop(){ digitalWrite(random(3,6),HIGH); //Turn on a random pin 3,4, or 5 tone(2,random(40,1200)); //Play a random tone with hertz from 40 to 1199 delay(random(10,2000)); //Random delay from 10 to 1999 milliseconds digitalWrite(random(3,6),LOW); //Turn off a random port 3,4, or 5 noTone(2); //Stop the tone playing delay(random(10,2000)); //random delay from 10 to 1999 milliseconds } // (c) 2023 Let's Start Coding. License: www.letsstartcoding.com/bsdlicense
 

Walkthrough Video

Watch the video for a line-by-line explanation of how the example program works. Then you'll be ready to make some changes of your own!

Challenges

Can you complete the challenges? Change the code in your code editor above. Upload your code to see the effect when you're finished. Complete a challenge? Check it off the list!

Concepts

These are the new code concepts covered in this example program. To become a great coder, read through these concepts to learn new vocabulary.

Quiz

If you're having trouble, try to run an experimental program or look at the example code to help you find the answer.

1. Which syntax ends the entire 'void loop' function?




2. Which syntax ends a single code command?