Turn On and Off Buzz's Eye with a Light Sensor

Code

The code in the editor below is ready to run! Plug your Code Lab in to your computer's USB port with the cable and hit 'Upload Your Code!' to see what it does. Change something in the code, like a delay or pin number. Try to add something new to the program - it's yours to tinker with! You can always press the 'Restore' button to return the code to the working example.


/* Turn on one of Buzz's LED eyes with a light sensor reading The light sensor has a range of 0-1023, so 512 is the halfway threshold */ void setup(){ pinMode(A1,INPUT); //light sensor pinMode(3,OUTPUT); //One color of one of Buzz's LED eyes } void loop(){ if(digitalRead(A1)==LOW){ //if there is low light on the light sensor... digitalWrite(3,HIGH); //turn on LED 3 } else{ //otherwise if there is high light on the light sensor... digitalWrite(3,LOW); //turn off LED 3 } /*Depending on your room lighting, the LED may be on by default. To see the switch work, shine a light on the light sensor! If the LED is off, cover the light sensor with your hand to turn on the LED. */ } // (c) 2023 Let's Start Coding. License: www.letsstartcoding.com/bsdlicense
 

Walkthrough Video

Watch the video for a line-by-line explanation of how the example program works. Then you'll be ready to make some changes of your own!

Challenges

Can you complete the challenges? Change the code in your code editor above. Upload your code to see the effect when you're finished. Complete a challenge? Check it off the list!

Concepts

These are the new code concepts covered in this example program. To become a great coder, read through these concepts to learn new vocabulary.

Quiz

If you're having trouble, try to run an experimental program or look at the example code to help you find the answer.

1. Which syntax ends the entire 'void loop' function?




2. Which syntax ends a single code command?